How to Clean and Care for a MeshWorks Epoxy Coated Iron Spinner

Quick Answer

Wipe your MeshWorks epoxy coated iron spinner with a damp soft cloth and mild dish soap, then dry immediately. Avoid abrasive scrubbers and soaking to protect the epoxy coating.

Step-by-Step Cleaning and Care

1. Step 1: Remove all condiment bottles and loose items: Take everything off the spinner so you can access every compartment and the base. Set items aside on a counter. Check the bottoms of bottles for sticky residue before returning them.
2. Step 2: Wipe with a damp soft cloth and mild dish soap: Dampen a microfiber or soft cotton cloth with warm water and a drop of mild dish soap. Wipe each compartment, the outer rim, and the base. Do not submerge the spinner in water. Never use steel wool, scouring pads, or bleach-based cleaners.
3. Step 3: Rinse the cloth and wipe again with plain water: Wring out the cloth thoroughly, then go over all surfaces to remove any soap residue. Soap left behind can dull the epoxy finish. Use a second dry cloth to immediately buff away water spots.
4. Step 4: Dry completely before reassembling: Use a clean, dry microfiber cloth to dry every surface, especially the underside and the spinning mechanism. Moisture trapped under the base can lead to rust. Let the spinner air-dry for 10 minutes on a towel if you want extra assurance.
5. Step 5: Lubricate the spinning base if it feels stiff: Apply a tiny drop of food-safe silicone lubricant to the center pivot point. Spin the tray a few times to distribute the lubricant. Wipe away any excess. Do not use oil-based lubricants; they can attract dust and gum up the mechanism.

Product Used in This Guide

• MeshWorks® epoxy coated iron spinner (silver): The MeshWorks epoxy coated iron spinner has two small and two large compartments and sits on a lazy susan base for easy access. The divided compartments mean you'll need to clean each section individually, and the spinning base requires gentle handling to avoid loosening the mechanism.